Want this question answered?
Remove cover from inside of door to access the mounting nuts for the mirror. Remove the inside door panel if the mirror is electric to disconnect the wiring harness.
from shop manual: remove luggage cover and holder assembly remove speaker cover retainer nut and and screws securing the cover in place over the speaker assembly loosen and remove the speaker retainer screws securing the speaker in place, lift the speaker out enough to access the wire harness at the rear of the assembly disconnect the speaker harness remove the speaker installation is the reverse of removal
You do not need to remove the door panel to change your speakers. Remove the speaker cover, by prying outward on the speaker cover retaining clips. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
on what car???
Remove the door speaker cover. The cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install the new speaker.
The 1990 Chevy Corvette front drivers side speaker cover will need to be removed. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
you need to remove the door skins first there is a screw on the inside of the speaker cover that holds it on.
Gently pry up on the speaker cover with a small screwdriver or knife. There are screws under the cover to remove the speaker, unplug harness and its free.
remove the screws usually behind the door handle, also remove the cover tabs on the door grab on the panel and then remove the speaker grill and remove the three or four screws around the speaker not the ones holding the speaker in place.
Carefully remove the A pillar cover.. Then pop out the speaker screen..
YOU MUST REMOVE, UNFORTUNATELY, THE INNER DOOR PANEL TO GET TO THE CLIPS OF THE COVER....BB
With a screwdriver