check out www.bareasschoppers.com. has a very good explanation with pics
You must remove the wheel/tire in order to remove the front strut.
Begin by removing the tire and wheel from your 1993 Honda Civic. Remove the brake assembly and the brake rotor. Remove the axle retaining bolts. The axle will come off.
Front tire dimensions: 3.50-19
Its a bottom mount alternator, you remove the left front tire and come from underneath. Pry Bares may be needed. i jacked mine up,never had to remove tire
I'm not sure what you mean here...are you wondering what tire size is on a 1992 Honda Prelude? Or, how do you get to the spare tire? Or, how do you remove a tire?
You will need to remove the tire and wheel from your 1986 Honda Accord. Remove the brake caliper and the brake spring. The disk brakes will come off. Reverse the process to install the new front disc brakes.
Remove your air cleaner housing, left front tire. unplug and unbolt your alternator and remove it up throw the air cleaner area.
Place jack under vehicle lift only enough to take pressure off tire Loosen but do not remove lug nuts Lift vehicle so that tire is off ground Remove lug nuts Remove tire and wheel Re-install in reverse order
The Honda Shadow Spirit, recommends 29 psi in the front tire and 32-36 psi in the rear tire.
honda silverwing tyre pressure
In front of the passenger side front tire. Remove the fender liner to access.In front of the passenger side front tire. Remove the fender liner to access.
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.