Remove the plastic cover from the arm, there is a size 12 nut on its base you can loosen, then just pull the arm by holding it from its base.
just twist the the end piece of the front wiper lever. left hand side on the European model
I have the same exact problem , i have a 1998 tiburon and the wipers are not moving.. i think it might be the wiper motor, I will buy one and see if that's the issue
Remove the inside panel from your Hyundai rear door. The wiper motor mechanism will be visible. Remove the wiper motor linkage. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new rear wiper motor.
The 2000 Hyundai Tiburon has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
Remove the wiring harness from the back of your 1995 Chevy Lumina front wiper motor. Remove the traveling arm linkage from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new front wiper motor.
in the wiper fuse box!!
Mounted on the firewall directly behind the brake master cylinder reservoir. UNDER WINDSHIELD WIPER COWL COVER remove the wiper arms remove the windshield wiper cowl cover disconnect the eletrical connector from the wiper motor and remove the motor remove the wiper motor retsining bolts pry the linkage arm off the wiper motor pin with large screwdriver
As of 2011, all Hyundai Accent model years come equipped with hook-end wiper arms (with the exception of the rear wiper on the 2007+ models which has a Roc Lock 2 arm attachment). See sources and related links below for wiper blade installation videos.
The windshield wiper motor is under the front cowl. After removing the cowl the motor should be easily accessed for replacement.