Want this question answered?
A door panel on a 2005 Hyundai Accent is mounted with screws and clips. Loosen all the mounting screws. Pull the panel outward and pop out the clips. Remove the door panel.
remove the dash board panel around it and take it out
Remove rear seat, there is an access panel for the fuel filter. Remove access panel and have access to fuel filter.
The front driver side quarter panel on a 2002 Hyundai Accent is mounted with several bolts. Lift the hood and loosen the bolts in the engine bay. Loosen the bolts in the wheel weld, door hinge and to the bumper. Pull and remove the panel outward.
The 1996 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel
You will need to remove the fuse identified as "passenger airbag". the fuse box is located on the driver's side kick panel.
rear door panel ,how to open.
The 1997 Hyundai Accent OBD 2 port is on lower edge of dash next to kick panel
I finaly found out how to replace these license plate lamps. I open the trunck, removed all the 15 screw that retain the big brown plastic panel. Then remove the panel and remove the center stop light (3 mores screw). Finaly, remove directly the bulb housing by the rear by unscrewing them with the hand. And remove the bulb from the housing.
It's under the back seat. Behind an access panel.
A door panel on a Hyundai is secured with several screws. Loosen and remove and the screws then proceed to gently pull the panel outward. There are several clips for extra support. Pull the panel outward and the clips will come off as well.
The turn signal relay is behind the storage compartment on the left side of the steering wheel. All you have to do is pull the compartment out and there you are.