0
It's pretty easy. I have the 2004 model year, which is basically the same thing.
Raise the headrest all the way up. Look at the plastic pieces on the seat where the headrest supports go into the seat. One of them will have a small hole. Get a paperclip and push it into the hole while pulling up on the headrest and it will come out.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the compressor on the Pontiac Grand Am?
behind the head lights
Will a 1995 Pontiac Grand Am head light assembly fit in a 1993 Pontiac Grand Am?
yes it will i have swiched the head light assemblies on my car from a 95 grand am and yhey were same but you may need to adjust the head lights after you intsall it
How do you replace the water pump on a 1993 Pontiac Grand Am?
remove the exhaust manifold (its under it) if it is a single or dual over head cam engine
How do you check for spark on a 95 Pontiac Grand Am?
You have to remove the head gasket to check in the cylinder. The click and flash should be obvious on a working spark plug
Where is the head gasket located on a 1992 Pontiac grand am?
Between the head and the block. First, remove intake manifold and exhaust manifold. Take the valve cover off and unbolt the head. Then, pull the head off and you'll see the gasket.
What is the rear head room of the 2007 Suzuki Grand-Vitara?
The 2007 Suzuki Grand-Vitara has 38.2 in. of rear head room.
What is the rear head room of the 2007 Jeep Grand-Cherokee?
The 2007 Jeep Grand-Cherokee has 39.2 in. of rear head room.
What is the front head room in the 2007 Suzuki Grand-Vitara?
The 2007 Suzuki Grand-Vitara has 40.0 in. of front head room.
What is the front head room in the 2007 Jeep Grand-Cherokee?
The 2007 Jeep Grand-Cherokee has 39.3 in. of front head room.
How do you fix a blown head gasket on a 2001 Pontiac grand prix front wheel drive?
Only one way, remove the head and replace it. This is a major repair that should only be done by and expert.
Will gasket sealant work for a blown head gasket on a 1999 Pontiac grand am?
No. You need to remove the head(s) and have the head(s) checked for cracks and straightness, then install the head(s) with new head gaskets. Most head gasket manufactured are assembled dry, no sealants.
Where are the spark plugs on a 97 Pontiac Grand Am?
at the end of the plug wires in the head
