Want this question answered?
You go on Ebay and Type in Fuse Panel diagram for a 1997 suzuki esteem
Remove the liftgate inner trim panel.Remove the liftgate inner trim panel.
remove the inner door panel, you can access the bolts from the inside of the door.
Check the fuse panel under the dashboard. Usually has a diagram of the fuses and which ones control which function.
The inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel. Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle. Then remove the screws around the perimeter of the door that hold the outer panel. The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
remove the door panel. The door handle is fastened with two 10mm nuts. just unscrew those and if has a lock, remove the linkage clip from the lock to be able to remove the door handle. Installation is in reverse order. I just replaced mine today.
luck
remove inner door panel for access to lock
The fuse panel is located under the driver's side instrument cluster. Replace fuse labeled "acc"
remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.
Clips hold the door panel in place. To remove the panel, you will need a small pry bar and apply gentle pressure to the gap between the panel and the inner part of the door.