Remove the two screws from the arm rest. With the door open,standing looking at the inside door panel,take a medium flat tip screw driver slide it in between the metal and the inside panel, and pry out genitally. You will hear a poping sound that is the plastic keepers coming out.Work your way around the door till all the keepers are released,don't go across the top of the door. Grab the bottom of the panel and lift out and up. Be carful with wiring in the door.
remove the inner door panel, you can access the bolts from the inside of the door.
use your mom
luck
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
remove the inside door panel and go from there.
Remove the inner kick panel. Disconnect the wiring harness. Drive the pins out of the hinges - remove door.
you have to remove the whole control panel assembly. pull off dash front panel, unscrew the panel, unplug the wires and remove th cable. the blower switch mount from the back of the panel
Easy. Remove dash panel,two side clamps with your fingers and it comes right out. Just take your time.
Remove the screws in the door panel.
To the fuel tank/ pump, NO
To remove the door panel on a 1988 suburban, first remove any light lenses and stereo speaker covers in the door. Then, gently pull at the corners with a screw driver to remove the larger panel.Ê
depending on model the 94-98-99 old body you have to release late assembly on the side and the remove panel to then remove both screws that hold it to the door and pull out. on the 00 up you can just remove panel and remove screws that hold it to the door.