Hi,
The "hard part" is that there are two (2) bolts that have to be removed before the trim panel will come off - one near the door handle, and one under the armrest switch panel. Pry up the switch panel to get access to the second bolt. Carefully pry off the inside trim cover (behind the handle that opens the door). Then use a trim removal tool to loosen the retainers around the edge of the door.
I have included a link that has some pictures of this operation.
You have to remove the inside panel, where the window crank is, or would be.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
NO,do you need to down the fuel tank to change the fuel pump.
how do i remove the passenger door inside panel?
Remove the dppr panel and there are screws on the inside.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
open the very bottom door in the center panel. In the very back remove the two screws and pull out.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
With a soldering iron?
remove the inside door panel and you'll see how it attaches on the inside of the door.
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
Remove the inside door panel of your 1982 Chevy Corvette. Remove the window retaining clips. The window will lift out.