On the top of the door, just below mirror you unscrew one bolt. Then, unscrew one bolt behind the door handle. Next, gently remove the door panel itself by inserting a flathead screwdriver on the bottom of the panel, and inserting and sliding it on the bottom part. The panel will remove, but be careful because wires are connected to your door lock and windows which are near the door handle.
It is relatively easy, the only really tricky part is sliding the first piece back on (below your mirror). That last step is a bit tricky, but not impossible. When it is off, you'll see how to slide that last part back on.
You have to remove the inside panel, where the window crank is, or would be.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
A mystery to me. Don't want to break anything but cannot figure out the fasteners.
how do i remove the passenger door inside panel?
on the dash under directional
Remove the dppr panel and there are screws on the inside.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
remove the inside door panel and you'll see how it attaches on the inside of the door.
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
Remove the inside door panel of your 1982 Chevy Corvette. Remove the window retaining clips. The window will lift out.
Remove the screws in the door panel.