pull it down hard pops out
it is on the windshield behind the mirror..there is a black plastic cover behind the inside mirror, sensor is inside that cover..
remove drivers inside door panel and there are 2 or 3 bolts that hold mirror on from the inside after you diconnect the wire harness if it is a power mirror
Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
The first step to remove the interior rear view mirror on a 1990 Mercedes 300E is to heat up the adhesive with a heat gun. Twist back and forth as the adhesive melts and pull the mirror from the window.
remove drivers inside door panel and there are 2 or 3 bolts that hold mirror on from the inside after you diconnect the wire harness if it is a power mirror
You have to remove the complete mirror from the car. Remove the nuts from the inside.
Remove the inside door panel of your Chevrolet Astro Van. Remove the wiring harness from the mirror. Remove the side mirror retaining bolts.
Grab it and twist it 90 degrees. It comes right off.
Passenger mirror access is same as drivers side. Three screws accessible inside door panel to remove entire mirror assembly. To remove mirror within the mirror assembly it just pulls off - snap fit of mirror mount to drive.
Remove the plastic cover on the inside behind the mirror and then remove the three nuts holding ther mirror on. When you pull out the mirror unclip the wiring harness.
pull off plastic inside directly behind the mirror it just pulls off and you will expose the bolts to remove the mirror.
remove inside pannel you will see 3 nuts behind mirror remove and mirror will come out install new