Want this question answered?
Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
remove inside pannel you will see 3 nuts behind mirror remove and mirror will come out install new
on the inside of the door, opposite of the mirror there is a plastic cover, remove the cover and the bolts holding the mirror on will be exposed.
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
Chevrolet Lumina. Remove the wiring harness or the mirror linkage. Remove the mirror retaining bolts. Reverse the process to install the new passenger side mirror.
Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.
Passenger mirror access is same as drivers side. Three screws accessible inside door panel to remove entire mirror assembly. To remove mirror within the mirror assembly it just pulls off - snap fit of mirror mount to drive.
How do I install passenger side mirror 2010 Ford Explorer
Take the plastic cover off on the inside of the door .There should be a Phillips screw holding it on. Then remove a piece of foam rubber. This should expose three 10 mm nuts holding the mirror on. remove mirror . Reverse to re install
Most cars your will have to remove a small trim panel on the inside of the door directly behind the mirror. If it is power there will be a harness connector coming from mirror. disconnect the connector, then there will be (3) nuts holding the mirror to the door. remove the (3) nuts. That's it, to install reverse above order.
You need to remove the inside door panel, then remove the bolts that secure the mirror. It is very simple procedure.
remove inside door panel to access 3 nuts holding the mirror.