Want this question answered?
The 1979 Chevy Silverado glove box latch is held in place with two retaining screws. Remove the retaining screws and the glove box latch will come off.
2000 Protege did not have a key-lock glove box. Pull the glove box release handle all the way open, then keep pulling it till it snaps off. Behind where the handle pivot point was is an opening to the inside of the latch mechanism. Stick a thin tool in the rectangular opening and push the latch bolt down to release the glove box. Once open, remove the 3 screws that attach the latch to the glove box, and head to your nearest junk-yard for a replacement latch.
latch broke- http://www.dubdiy.net/interior/bb.html == == get creative, maybe remove door from where it is mounted by the hinges..? good luck :)
Remove the three Philips screws along the top and the two on the bottom corners and remove the entire glove box. You can then work on the latch from the back of the latch and easily open the glove compartment by gently prying off the corners of the glove box from the locking pins.
Look up under the handle and there's a hole perpendicular to the front of the glove box. Insert a small screw driver about an inch into the hole and pry gently towards the back of the truck which should release the glove box. It takes some encouragement, but remove the 2 screws holding the latch (from the inside of the glove box) and the latch should come free out the front.
Open the glove box and you should see a single screw on the back of the latch. Simply unscrew this and the latch should come out.
Open the glove box, unscrew the three screws next to the lock, tap lightly and it will come out.
Remove the back seat.
2001 nissan how do you remove the nissan emblem to access replace broken handle
Pry the knob off and remove threaded lock ring for 79 blazer as well all 79 Chevy truck without locking latch.
The hood release handle is in the glove box.
remove inner door panel for access to lock