on top of headlight assembly are 2 plastic slide pins, pull up on these to release assembly. when putting back on. push in on assembly to put slide pins down to hold assembly in.
The headlamps are an assembly, and the lenses/covers can not be removed.
lift trunk. pull back panel at light assembly. remove the plastic wing nuts that hold assembly in. then pull it out. to replace the bulbs, twist socket out, then remove bulb. good-day !
nightmare. you have to remove the front bumper cover. then you will see the bolts holding the lamp assembly.10mm socket
there are two screws holding the light assembly to the car. Remove the two and replace after removing headlight
remove front headlight assembly to get at horn,it is down below light assembly..
unsrew the main bolt and pull
lift up hood, on top of headlight assembly there are 2 tabs to pull up, then pull assembly out...
In order to remove the whole assembly, you have to remove the front bumper cover which will expose a bolt on the bottom of the assembly which has to be removed...along with the bolt on top of the radiator support beam on each headlight!
you need to remove the front fascia to remove the headlamp to change the bulb
Remove the entire head lamp assembly
Remove the belt from your 1999 Chevrolet Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining nuts. Reverse the process to change to the new alternator.
remove brake drum or caliper, remove caliper mounting bracket if nessesary. unplug electical connecter from wheel sensor on the back side of knuckle. remove 4 hub to knuckle bolts, remove the hub and bearing assembly!!