0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove old radiator 97 Toyota tacoma?
To remove a radiator from a 1997 Toyota Tacoma the truck needs to be cooled down. The coolant needs to be drained, and loosen the radiator mounts. When everything is loosen remove the radiator.
How do you replace the water pump on a 1993 Ford Explorer?
To replace the water pump on a 1993 Ford Explorer, disconnect the battery and loosen the belt tension pulley. Remove the belt on the water pump. Disconnect the radiator hose from the pump and remove the bolts holding the pump. Remove the old pump and gasket. Clean the surface of the water pump mount with a gasket cleaner. Insert gasket sealer, new gasket, and pump. Reconnect radiator hose, belt, and tighten tension pulley. Reconnect the battery. Refill radiator with antifreeze.
How do you change themostat in a 1993 Ford Ranger?
Follow the upper Radiator house to the thermostat housing, there's 3 bolts holding it on. Take off the housing, remove the old thermostat, put in the new one and replace the housing. Make sure you drain the radiator first.
How do you change coolant on a 1993 Nissan 240sx?
open the radiator cap, find the plug at the bottom right of the radiator and open it to drain old coolant
How do you remove and install a radiator on a 1992 Chevy baretta?
It is simple. Remove all hoses and tubing connections. Remove radiator retaning bolts -screws or other. Take the old one out and put the new radiator in it's place Now reconnect all things disconnected earlier.
How do you replace the radiator on 2004 Impala LS v6?
you have to remove the old one first. paying careful attention to where the screws/bolts come from. remove all of those, take them out carefully, then replace the radiator and connect with the bolts/screws you removed from the old one.
How do you flush the radiator on a 1990 Volkswagen cabriolet?
open the petcock drain. remove the radiator cap and fill the radiator with water, the fresh water will push out the old coolant and flush the system. Catch the old coolant inn a container as it is poison to animals.
How do you remove the radiator plug on a 2001 Chevy Impala 3400V6 engine?
I am trying to drain old antifreeze and replace with new and cannot figure out how to remove the radiator plug on my 2001 Chevy impala 3400V6 engine?
How do you change the radiator hoses on a Honda VTX 1800 motorcycle?
Do this on a cold engine. Remove the radiator cap. Then remove the clamps holding the upper radiator hose in place as it attaches to the radiator and the thermostat housing. Next remove the clamps that hold the lower radiator hose and then remove the hose itself. The clamps are easily removed with a screwdriver. Replace the old hoses with new ones and fasten them in place with preferably new clamps. The coolant will have drained out and has to be replaced after fitting the new hoses. Check for air in the cooling system.
How do you remove intake manifold gasket in 1993 Benz 190e?
Remove the intake manifold retaining bolts from your 1993 Mercedes-Benz manifold. Remove the old manifold gasket. Clean the surface and put the new gasket on.
How do you replace radiator hose 2004 3500 dodge ram?
let engine cool down to room temp. drain the coolant from your radiator, loosen and remove hose clamps then remove old hose. now install new hose in revers order. fill radiator with proper coolant type.
How do you change thermostat on motor on 1993 Nissan maxima?
* Disconnect the negative battery cable * Drain the coolant from the radiator and the engine block * On SOHC engines detach the upper radiator hose from the coolant outlet at the intake manifold and the radiator,then unbolt the hose clamp at the timing belt cover and remove the radiator hose.Detach the bypass hose from the thermostat cover * On DOHC engines remove the drivebelts and the idler pulley bracket.Also remove the lower radiator hose and the water pump drain plug from the side of the block which faces the front of the vehicle * Remove the thermostat cover from the engine.Be prepared for some coolant to spill as the gasket seal is broken * Remove the thermostat,noting the direction in which it was installed * Scrape off any old gasket or sealant on the thermostat housing and the thermostat cover,then clean them with lacquer thiner
