Pry loose the lens cover and remove the two screws underneath. Then open the sunglass cover and remove two more screws. Disconnect the wiring harness. That's it, at least for the 2001 and similar models.
You have to remove the console cover. This starts with two screws in the console storage tray.
how to I remove the overhead console on the S 10 Blazer?
To remove the overhead console you will first need to disconnect and isolate the negative battery cable. Remove the overhead screws and pull straight down on the console.
Remove the Toyota Camry headliner. The overhead console retaining screws will be visible. Remove the retaining screws and the console will come off.
You will need to remove the headliner. With the headliner removed you will be able to see the overhead console retaining screws. Remove the retaining screws.
yes
The 1999 Dodge Durango overhead console wiring connections are beneath the overhead console. You will need to remove the overhead console?æin order to access the wiring connections.
Remove the screws that hold the headliner in place. With the headliner removed the overhead console retaining bolts will be visible. Remove the retaining bolts. Remove the wiring harness from the console.
You just unscrew the bolts and it falls right out on the ground.
remove plastic shroud under engine. remove plug on oil pan.
In a 2004 Subaru Outback, the thermostat is located on the bottom of the engine on the driver's side. Remove the screws holding the fitting that the hose (from the bottom of the radiator leading to the engine block) is attached to, remove the fitting, and the thermostat will be underneath.
to remove the clock you have to remove the whole air vent and console compartment, there are 3 clips at the top holding it in, i just pryed from both bottom corners to get the bottom out and wiggled and the top followed. Then there are various screws holing the clock in from behind.