Want this question answered?
Bulb replacementTo replace the headlight bulb you have to disconnect the connector that plugs into the bulb, then you have to undo the metal clip with a screw driver and after you pull the clip down the bott will come off, then you pull the headlight out .
To replace the headlight bulb: 1. Remove the headlight door. 2. Remove the four screws that hold the headlight bulb in place. 3. Pull the headlight bulb out and unplug the wire harness. Reverse the process to install the new headlight bulb.
Open the bonnet. Remove the grill. Remove the screws holding the headlight in. Carefully pull the headlight out. Remove the cap on the rear of the headlight.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
Remove backing plate on headlight unit.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
Passenger side go in from under the hood and find the socket. Remove it and replace the bulb. Drivers side is a different story. You have to remove the battery to get at the socket.
To change headlight bulbs in a 2005 Ford Escape, first make sure the light switch is in off position and replace the passenger light bulb. Next, get to the driver's side bulb, remove the battery by holding it down, to be able to change the headlight bulb.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
unfortunately you going to have to remove the battery to get to the headlight bulb. But it is pretty easy besides that.
remove headlight frame you can see it then
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.