answersLogoWhite

0


Best Answer

Yes To clarify, there is not a 'faceplate' to speak of - that is a part of the radio itself. The holes are used to remove the entire radio unit, and are very typical of most Ford radios for many years. In fact, I think it's known as a 'DIN mount'. Ford radio removal tools are available for just a few dollars from any auto parts store. Insert one into each set of 2 access holes on each side of the face of the radio unit. When inserting the tool, you will feel a spot where the notched ends have caught into a slight indentation. Push the tops of the tools outward (left and right) while simultaneously pulling the radio forward, away from the dash. When you have the radio out, you'll see that the tools are actually releasing the clips on the side of the radio.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the plastic face plate covering the CD Radio area There are four holes that are set deep into the console Is that it?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Music & Radio

How do you remove the radio in 1978 Corvette?

Pull the knobs off and there will be a nut behind each. Remove the nuts and the radio will slide back. Remove the side carpet walls by the shifter console and the radio can be removed from either side, passenger prefered.


How to take out the radio of a 95 Mazda millenia?

On my 1993 MPV it is like this. Remove the ash tray. Remove the 2 screws holding the plastic frame, now visible on the bottom of the ash tray holder. Unsnap the frame from the bottom. Unscrew the cigarette lighter bulb holder and unplug the cigarette lighter connector to get them out of the way. There are 5 screws. 1 in each corner and one in the bottom center. Unscrew them and pull the radio out just far enough to see the plastic molex connectors. There are 2 plug connectors and the antenna wire connector. Unplug them and plug into new radio. Put it back together.


How do you change a radio in a 92 Nissan nx?

hey,under the two vents abve the radio, there are two screws. remove them. one more screw under the cigarette lighter,and one more immediately to it's right. remove all four screws. light the part of the console that covers the stick shifts,and the plastic console around the radioshold pop off, it's all plastic poped togeter, so be careful not to break any of the teeth that put it together. then four screws around each corner ofthe radio. remove them and the system should slide out. unplug the one large cable wire for the radio, and from the back of the system, a large plastic plug holding all the wires, remove that one too. if your planning on installing a newer aftermarket one, take notice of the colour wires, as those will help ensuring you wire the new one properly. if you go into radio shack,or best buy, they actually have plug converters to make the job a lot easier for you.. best of luck


How do you replace a radio in a 1996 Dodge Intrepid?

Remove the plastics with a flat head screwdriver (be careful not to break the plastic clamps) surround the face fo the radio. Unscrew (should be four) screws remove radio and make sure to disconnect wiring harness and ground wire. Enjoy.


How do you Remove radio 98 ford transit?

remove the 2 plastic side panels. then you will see 4 small holes, insert a coathanger or other small object in to each hole and push away from the radio. then pull out the radio

Related questions

How do you remove the radio from a 2005 Acura TL?

To remove the radio remove the mounting screws for the center console. Pull the center console off the 2005 Acura TL. Remove the rest of the mounting screws and pull the radio.


How do you remove defrost control console?

I have a 2004 Malibu and trying to remove the radio/defrost control console


How do you remove and replace center console on 2003 VUE?

Shift to 1, set brake, turn ignition off. Use a plastic shim to pry the black shifter housing up off the console. Once loose, move it toward the back of the car. Find the screws that hold in the ashtray or change compartment. Remove those 4 screws and pull this part out. Now find the two screws that hold in the base of the center console fascia housing the heater a/c controls and covering the radio. Remove the screws. Pull the base of the console toward the back of the car. It will pull out of its tabs without too much effort. The climate controls and hazard lights are connected by wires to the console. The radio is mounted in the dash behind the console.


How do you remove the radio from a 1987 Honda Civic?

The radio on a 1987 Honda Civic is held in place by the center console. First remove the center console to reveal the several mounting screws holding the unit in place. Remove the mounting screws and pull the radio out of the car.


How do you remove radio from 07 Hyundai Tucson?

The radio on a 2007 Hyundai Tucson is positioned inside the center console. The console will need to be removed so the mounting screws for the radio bracket can be reached. Loosen the bracket screws to holding the radio and disconnect the wiring. Pull and remove the radio.


How do you remove radio 94 Seville?

Remove the plastic overring around the radio then pull on the console cover that covers the gearshift and goes up around the ashtray, it snaps on, just give it a firm pull, there are two gold screws that face you take them out and then two there are two nuts on two screws loosen the nuts and slide the radio out. Remove the plastic overring around the radio then pull on the console cover that covers the gearshift and goes up around the ashtray, it snaps on, just give it a firm pull, there are two gold screws that face you take them out and then two there are two nuts on two screws loosen the nuts and slide the radio out.


Do you have to remove the dash to remove radio in 1998 Chevy blazer?

No. just remove the plastic piece around the radio. It pops off.


How does one remove a radio unit from a Hyundai lantra 1.6 GLs automatic?

The radio unit on a Hyundai Elantra is held in place by a mounting bracket found behind the center console. First remove the center console then remove the screws on the mounting bracket. The radio will be able to slide forward. Once pulled out remove the wire harness that plugs into the radio.


How do I remove the radio in a silhouette?

ÊUsing a screwdriver, remove the screws from the center console panel.Pull the panel off,use the screwdriver to remove the screws holding the radio in place, pull the radio out and remove any wiring connections.Ê


How do you remove a cassette player radio from a 2001 Honda Civic?

To remove the original cassette player from a 2001 Honda Civic loosen all of the mounting screws to the center console. Remove the screws and any clips. Pull of the center console to reach the bracket for the radio. Remove the mounting screws off of the bracket. Pull out and disconnect the radio.


How do you remove the center console of a 2000 Nissan Altima?

pry up on the bezel around the shifter then remove 2 screws under bezel. remove 2 screws above radio faceing down remove ash tray remove radio bezel. move bolth seats up on the side of the ctr console is 2 screws remove then remove 2 screws in front of the shifter that are now showing after radio bezel is removed.remove screws located in cup holder crank up e brake and slide console out


Where is the diagnostic plug on Honda accord 2.0 se w reg?

in the center of the console located straight down under the radio. remove the center plastic door or plate, facing the gearshift lever.