This requires a special tool to remove and install the pulley. Most auto parts stores should have one in stock Best to remove the pulley with the pump removed from the engine compartment.
need a puller to remove the power steering pump pulley, then remove the bolts holding the pump on
It is presssed on and it requires a special puller to remove it. Advance auto parts stores will rent one to you.
How do you put the pulley back on the power steering pump on a 1990 suburban
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
you have to have a puller designed to take the pulley off. alot of auto parts stores will rent you one.
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
Begin by removing the belt from your 1994 Chevy Suburban power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. The power steering pump will come off.
That pulley is a press fit type. There are not any threads. You will need to rent/buy some pullers for that power steering pulley.
You will have to get a tool called a Power steering puller to remove the pulley. Then another tool that puts it back on.
With a power steering pulley puller. Your local auto parts store should have one you can rent or buy.
Remove the serpentine belt. You will need a puller kit. Includes the removal puller tool and install tool for the pully. There is no other way. Awkward but fairly easy. Stan
You will need to buy or rent or borrow a power steering pulley puller. Trying to remove and replace the pulley without the correct puller will surely damage the pulley and or the pump.