Want this question answered?
In a 1987 it's under the steering column, to the left. Hope it's the same for the 1988.
I have an 1988 Deville. On my car the power steering pump is on top of engine next to the belt tensioner. You will see a reservoir with a plastic cap . Remove cap and put fluid in there.
Does your car have the 4 cylinder engine or the V6?
PROPERLY remove air bag (if equipt), then remove nut holding steering wheel on and then use a steering wheel puller to remove it.
You can add power steering fluid to your 1988 Chevy Astro by removing the top to the power steering fluid reservoir. Pour the fluid directly into the reservoir.
My F-Reg Golf Mk II has Power Steering.
were is the power steering pressure switch on a 1988 oldsmobile cutlass 2.8 engine
Yes. The final year of Fiero production ( 1988 ) had power steering.
Either MB power steering fluid or Dexron ATF.
It does not matter on that year as long as it is power steering fluid.
To remove the steering wheel in a 1988 Chevy Celebrity standard version: !. Remove the screws that hold the horn pad in place then remove it. Unplug the wire at the connector. 2, If it still has the safety clip remove it. 3, Use the appropriate wrench to remove the nut from the steering shaft. 4. Use a steering wheel puller to loosen then remove the steering wheel. Reverse the instructions to replace the steering wheel. Steering wheel retainer nut should be 30 ft. lbs. torque.
The power steering pressure switch screws in. Simply unplug the wire harness, unscrew the old switch and screw in the new switch. Plug the wiring harness back in.