The vehicle needs to be raised and supported by the frame. The u joint at the rear of the driveshaft needs to be removed, as well as the brake lines and abs connections. the rear axle assembly can then be unbolted from the springs and removed.
how do you remove the right rear axle on a 1998 ford expedition?
how to remove rear axle from 1988 f250 ford
take the axle out
How do I remove rear coil springs
yes
If the axle doesn't readily pull out then it is most likely connected in the pumpkin. There may be a c-clip and slug that needs to be removed in order to pull out the axles.
Take rear cover off and losen the 6mm. head bolt. Rotate the gears and remove c-clip from axle. Slide axle out.
how do you replace a Ford F150 rear axle seal
If your talking about the door speakers then you will have to remove the door panels to get to the speakers.
The biggest difference is the platform they are based on. The Excursion is based on the F250 while the Expedition is based on the F150. The Excursion will have larger rear axle, stiffer rear suspension, and is slightly larger overall. There are other differences as well but these are the highlights.
That might be the rear axle, it that is what you want to remove then you will need to remove the rear axle cover drain the fluid and the locate the center pin bolt and remove that in order to remove the center pin to get at axle c-clips then remove the c-clip for the axle you want to remove then slipe the axle out being careful not to distrub the axle bearing
The 2012 Ford Expedition has 59.9 in. of rear hip room.