Want this question answered?
Front or rear bumper? if its the front, all the lamps have to come out then remove the bolts from underneath.
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.
unscrew bolts and take out.
Open the trunk, look for some plastic nuts, remove these and remove your rear lens assembly; remove sockets from assembly.
The headlamp bulb is removed from the rear of the headlight assembly. You have to remove the front bumber fascia to remove the headlamp assembly on this model. There is a plug that needs to be removed (twist one way, then pull) and the bulb should come out with it. Installation is reverse of removal. see the link below for more on removing te bumper to access the headlight.
Lower tailgate and remove two screws. Pull assembly to the rear and it will release.
Remove tire, remove brake drum, remove brake assembly housing, remove 4 bolts from back of hub assembly, gently tap to remove hub/bearing assembly.
It's removed from inside the rear compartment. Open the rear hatch and on the inside of the light you will find a snap-off cover. open it and remove the light assembly with a 1/4 turn. The bulb assembly should pop out
Can figure out how to remove rear rotor assembly to replace wheel bearing assembly on a Maxima 2004 Nissan
most places sell the complete hub assembly. You have to remove the brake assembly there are four bolts holding the hub assembly in place remove and reinstall
how much will it cost to replace rear bumper cover on 2003 93 saab
You have to remove the diff assembly