Very simple procedure for the Mercury Mystique. Like many of today's modern designs, Mystique bumpers are all molded plastic and pretty light weight. They damage easily upon impact, making them nearly disposable when the damage is not too great. If not too extensive, bondo works well.
You won't have to get into the trunk to access any bumper fasteners. Four main nuts and bolts are visible from the underside - these come off with any standard ratchet tools. The top two sides are held on with two small Phillips bolts which are torqued in tight and should be removed with a ratchet, not a Phillips screwdriver.
Once these are removed, the bumper will pull straight out and off. Good luck!
You must remove the entire rear fender.
the rear speakers are located in the back doors. you have to remove the door panels to get at them.
inside fuel tank,you can remove rear seat to access it
how to remove 2013 passat rear bumper
Remove rear bumper on 99 ford tarrus
how do you remove and replace rear bumper on an xtype jag
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
Removing the Rear Bumper of a Passat...
The 1992 Mercedes-Benz 300 rear bumper is held in place with eight retaining bolts. You can remove the rear bumper by removing the retaining bolts.
The 1994 Ford Explorer rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off.
The rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off. Reverse the process to install your new rear bumper.
To remove the spare tire on a Mercury Mariner insert the jack handle into the hole provided on the rear bumper of the vehicle. Turn the jack handle clockwise to lower the spare from underneath the vehicle.