Want this question answered?
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
You need to remove the rear seat, then remove the package tray.
the battery is located underneath the rear seat ,remove rear seat by pulling upward on front of rear seat remove from car.next remove both + and- cables then completely remove bracket that holds battery.remove battery,andsame directions in reverse order
Push and lift to release the two retaining clips located on the front bottom edge of the seat. Remove the 10mm bolt retaining the center rear of the seat.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
Open the trunk and disconnect the electric wires there. Go in the back seat and remove the covers/unscrew them.
How do you remove the rear seat on a 2002 diamante
inside fuel tank,you can remove rear seat to access it
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.