www.solaraguy.com
Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.The rear speakers in a Toyota solara convertible, you must first remove the existing speakers by removing the cusions from the back of the seats and then accessing the main wire panel to discconect them.
Begin by removing the speaker covers in your 2006 Toyota. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker.
In trunk the felt below the speakers is removable by a couple of friction buttons. Take them out and then unscrew the speakers and disconnect the wires.
I believe the Solara is the same as the Camry. You have to remove part of the center console to access the adjustment.
To replace the front speakers in a Toyota Sienna the door panels must first be removed. With the door panels removed the speakers will be easily accessible and the mounting screws can be loosen. Unplug the speakers and remove them. Install the new speakers.
Depends on the model year. Also, are you trying to remove the dash with the instrument cluster, or the center console with the HVAC and radio?
Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon. no remove the complete speakers
Open the trunk; Remove the trunk liner; Remove the bulbs/wiring; locate the bolts securing the tail light assembly to the body; Remove the nuts; lift the assembly away. Cheers
You cannot turn them, at leas not officially. The work around is to remove running light relay.
It's directly behind the glove compartment. Remove the glovebox door and you'll see the amp on the right. Cheers
The 1999 Toyota does not have rear struts. The automobile has rear shocks. Remove the retaining bolts from each end of the shock. Reverse the process to install the new shock.
The 1999 Toyota does not have rear struts. The automobile has rear shocks. Remove the retaining bolts from each end of the shock. Reverse the process to install the new shock.