Pop the trunk and there should be 2 bols holding down the tail light but yours is older then mine you might have a hidden slot there like on my new celica there will be a plastic cover that will hide the guts of the taillight inside of the trunk and there you just pop the cover and you dont have to pull out the tail light its all right there untwist the bulb from the taillight replace the twist back in replace the cover or the hold down screws.
Good luck on your project.
If you are looking to replace a tag light on your Mitsubishi you will need to remove the old one first. Check you owners manual for instructions on how to do this.
wen I stop at a red light my Mitsubishi galant sound like it is try to stop running
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
remove the broken one and replace with a new and working bulbs.
You have to remove the interior trim of the lift gate.
To remove and install a door mirror on a 2000 Mitsubishi Mirage, the door panel needs to be removed on the inside of the door. First remove any light lenses in the door, then unfasten the clips holding the door panel on. Then remove the mounting bolt for the mirror. Put in a new mirror, replace the door panel and the light lenses.
Might Be Yr running out of oil, or water levels are low.
Remove the thumbscrews which attach the headlight and turn / running lights. Both have to be removed to access the daytime running light bulb.Type your answer here...
I have a 2003 Outlander and tail light is similar- check out the WikiAnswer for the 2003 which helped me remove my tail light assembly.
Open your trunk and find the wires that go to the bulb over the license plate. Twist the base to remove the light.
how do i fix the problem if the tcl light comes on in a 2003 mitsubishi galant
Yes, there are about 6 bolts on each side you have to remove, you do not have to remove the molding, just use the access panels, however you have to pull the center part out, (3000GT part) a bit to remove the tail light.