there are 4 tx star(torx)bolts you need to undo,1 under each sun visor and 2 at the back of the panel roughly in line above the seats headrests.if the roof has not been taken off for a while you might have to give it a bit of ooomph!remove roof panel upwards from the back part first.you will need a tx star socket to undo the 4 bolts.
This depends on what type of roof panels you are trying to install. In general, you need to remove all of the nails and panels from the section that your are replacing. You then place roofing felt on the roof, making sure to nail it down. The panels go over the felt. Install them from left to right. http://www.ehow.com/how-does_4778280_installing-tin-roof-panels.html
Remove the large bolt behind the visor,then move the handle down that unlocks the roof.
you get a hack saw and cut it off or get an alluminion blade to saw it off
No. The 91 Corvette has a larger roof panel than the 88 Corvette's. yes if you change the front anchoring brackets
Solar panels are mostly better and more efficient in Slanted Roof.
It doesn't. That's why they call it an FRC (Fixed Roof Corvette)
There were a number of changes because it was completely redesigned but one major difference is removable roof panels. The rear windows were also removable.
Yes
Yes you can get solar panels in a mobile home. Remember solar panels are installed on the roof and mobile homes have a roof.
Removing the roof panel requires that you locate and back-out two screws from the rear of the panel, and the two at the front..., there was a tool supplied in the center console for this purpose.
on a roof
Fixed Roof Coupe Corvette... as far as i know no difference in performance