Want this question answered?
To remove the 2002 Hyundai accent rear seats find the tabs that cover the bolts and unbolt them. After the bolts are out lift the seat to remove it from the car.
2000 sonata rear seat removal
The rear seat on a 2002 Hyundai has bolt behind the seats. Push the seat down to reveal the bolts, and loosen them. The seat will be able to be removed from the vehicle.
for Hyundai accent gsi (yr 2000) needed: 12mm short socket ratchet remove spare tire cover. Fold down rear seats. Remove the bolt holding each seat separately onto hinge. remove these two pieces. Remove the two bolts from each side from the rear of bottom seat section. From the front of the rear seat there are two buttons-levers-mini handles.. push those towards the rear of the car and pull up on seat cushion.
* On fixed seats remove the bolts at base of the seat back sidecushions and detach them.Remove the two bolts at the rear of the seat cushion and detach the cushion assembly.Remove the two bolts at the base and remove the seat back * On folding seats remove the two bolts at the front of the seat cushions and detach the cushion assembly.Fold the seat backs forward remove the bolts and lift the assembly out
you need to remove the rear seat
On fixed seats remove the bolts at base of the seat back side cushions and detach them.Removethe two bolts at the rear of the seat cushion and detach the coushin assembly.Remove the two bolts at the base and remove the seat backs. On foldingseats remove the two bolts at the front of the seat cushions and detach the cushion assembly.Fold the seat backs forward,remove the bolts and lift the assembly out.
It is located under the rear seat. To access you must first remove the cover.
The fuel pump is located in the gas tank to get to it you got to remove the rear seat.
you have to completely remove the seat belt case and replace the seat belt, you can go to a junk yard, and get one from a compatible car.
Remove rear seat, there is an access panel for the fuel filter. Remove access panel and have access to fuel filter.
There should be two press clips at the front of the seat where both passengers would sit. There could possibly be two 14mm bolt at the base of the seat at the back that will have to be removed also.