First remove the shift knob pattern (it can be pried out with a small screw driver). Next remove the alignment pin with a pair of pliers. Then the shift knob can be unscrewed.
== ==
remove the shift knob,t bar, shifter boot and plate, the switch is attached with 2 screws
you dont have to but it makes it a lot easier.
It is bolted to the VALVE BODY that's inside of the transmission. You must remove the transmission pan to get to it.
its not screwed in. Just pull it out as hard as you can.
you remove the small plastic overdrive tab on the top of the shifter,it should pop off using a small flat head screwdriver, then unscrew the t bar that goes to the overdrive switch, count the turns. Then unscrew the shift knob.
A car with a manual or stick shift transmission.
Manual transmission is when you use the shift stick to shift to different gears in a car instead of driving without shifting gears,which is auto transmission.
Gear shift linkage?Remove gear shift from top and align
remove shift knob remove shift boot at the base of shift lever, there is a metal ring, push down, and turn it to the left. -there is a special tool to do this, but two flat head screw drivers work
If it is on a manual tranny it is the signal for the optimum time for you to shift for best fuel economy.
Stick shift.