you remove the small plastic overdrive tab on the top of the shifter,it should pop off using a small flat head screwdriver, then unscrew the t bar that goes to the overdrive switch, count the turns. Then unscrew the shift knob.
== ==
First remove the shift knob pattern (it can be pried out with a small screw driver). Next remove the alignment pin with a pair of pliers. Then the shift knob can be unscrewed.
A car with a manual or stick shift transmission.
Manual transmission is when you use the shift stick to shift to different gears in a car instead of driving without shifting gears,which is auto transmission.
The fork replacement could depend on which manual transmission is in the truck. The top has to be removed from the transmission. If the floor center can be removed with enough room to get the top off then it can be done. With carpet and seat removal it is often easier to remove the transmission.
remove the shift knob,t bar, shifter boot and plate, the switch is attached with 2 screws
If it is on a manual tranny it is the signal for the optimum time for you to shift for best fuel economy.
Stick shift.
The manual shift transmission does not have a filter.
The gears in your transmission may be sticking or worn out. This would cause your transmission to not be able to shift.
It depends on the vehicle. If the car was offered with a manual transmission or there are other cars with the same engine that have a manual transmission, then yes you can have stick shift installed.
If you shift manually, you have a manual transmission. If your car shifts for you, you have an automatic.