There are pliers available that do just that. Check with your local auto parts store.
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
Pop the hood open, remove the filter to the carburator, remove 1 spark plug wire boot at the front right side while facing the engine, remove the spark plug, add the new spark plug as well as the spark plug wire boot.
Gently twist the boost from left to right as you pull it off of the spark plug.
Disconnect the battery, remove the intake manifold, remove the spark plug boot covers and cables, and remove the old spark plugs. Put in the new spark plugs, attach the spark plug boot covers and cables, replace the intake manifold and connect the battery.
Remove the coil pack for each cylinder. On the bottom of the coulpack is a spark plug boot. Under the boot is the spark plug.
Disconnect the wires to the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the wires to the battery posts.
Disconnect the battery, remove the spark plug cables, and boot covers, and remove the old spark plugs. Put in the new spark plug, replace the boot cover and cables, and reconnect the battery.
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, reattach the boot covers and spark plug cables and reconnect the battery.
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Properly dispose of the old spark plugs. Next, put in the new spark plugs, reattach the spark plug boot covers and spark plug cables and reconnect the battery.
Disconnect the battery to the vehicle, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, carefully put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the battery.
Disconnect the car battery, remove the spark plug cables and boot covers, remove and dispose of the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the battery.
The factory service manual says that to get the spark plug wire off of the spark plug: Twist the boot about a half turn to loosen it from the spark plug and then pull it off using the boot. Don't pull the spark plug wire to remove it as you may find yourself pulling the wire out of the connector. Pulling it off by the boot may also leave the connector on the spark plug.