Want this question answered?
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
Remove the spark plug wire. Using a 5/8" spark plug socket with appropriate extension and driver unscrew the spark plug and remove it. The spark plug gap should be set to .045". Replace spark plug and reattach wire.
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.
Pop the hood open, remove the filter to the carburator, remove 1 spark plug wire boot at the front right side while facing the engine, remove the spark plug, add the new spark plug as well as the spark plug wire boot.
Remove the spark plug wire from the spark plug and make sure it will not touch the spark plug. Or, you can remove the spark plug, but be sure and cover the hole so no debris will fall into the cylinder.
Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.
Remove the rubber cover and plug lead from spark plug. Using a bike plug spanner [cheap at your favourite auto supermart] remove plug.
Disconnect the wires to the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the boot covers and spark plug cables and reconnect the wires to the battery posts.
The spark plugs on a Ford Explorer are replaced by first disconnecting the battery. Remove the spark plug using a spark plug socket. Replace with the factory recommended spark plug.
you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out
Remove the coil on top of the plug, and there is the spark plug.