try coming up from underneath for the rear plugs, there isn't a lot of room on the drivers side due to he brake booster/master cylinder but I have found it a bit easier from underneath.
Disconnect the battery, remove the engine cover, remove the spark plugs wires and boots, and remove the spark plugs. Put in the new spark plugs, replace the spark plug wires and boots, replace the engine cover, and connect the battery.
Disconnect the battery, remove the engine cover, remove the spark plug cables and boot covers, and remove the old spark plugs. Put in the new spark plugs, attach the boot covers, and cables, replace the engine cover, and connect the battery.
Disconnect the battery, remove the engine cowl, remove the spark plugs cables, boots and plugs on the drivers side of the engine, replace with new spark plugs and attach the boot and cables. Do the same on the passenger side of the engine, replace the engine cowl, and connect the battery.
You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.
2003 c320. So a v-6 correct? They are located on both sides of the engine. Your engine will have spark plug cable wires going from the ignition coils to the spark plugs, you need to remove the cables off the plugs before you can remove the spark plugs.
you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out
To fix an engine with no compression first try replacing the spark plugs. Remove the spark plug wire and then remove the spark plug. Replace the plug with a new one. Reattach the wire. Replace all of your plugs and see if your engine will fire.
The left side spark plugs are under the pop-off engine cover. Remove the coils and the spark plugs are right there. The right side plugs are in the same location on the other side of the engine...unfortunately you must remove the intake manifold to access them.
Put the IROC up on jack stands and remove the spark plugs from under the engine.
were is engine cover wot does it do
On a Hyundai 2.7 (6) cylinder engine the (3) front spark plugs are readilly accessible from the front of the engine.... To access to the (3) rear spark plugs you must remove the intake manifold.
Spark plugs are hidden under the plastic engine cover. You have to remove the ignition module as well which fits over the four spark plugs.