Instructions as follow: 1. remove right headlight. 2. remove battery and battery tray. 3. remove tube between air filter and throttle body. 4. reach behind the gear linkages and feel the bolts holding the starter motor. 5. there are what seems like 3 bolts on a L shape, the center one holds the plate for the gear linkages, do not undo, it's a pain in the neck to put back. 6. undo the two bolts holding the starter motor. 7. from under the car undo the one nut holding the power feed from the battery and the nut holding the cable from the key. 8. lift the back of the starter motor up clearing the oil pressure sender and so the front of the starter motor points down. 9. support the front of the starter motor and ease it down and out.
There are a number of motor options available for the Daewoo Matiz. As there is a virtually identical car marketed under the name Chevy Spark, made by GM, parts such as the motor are interchangeable.
Hi, Disconnet the battery cables from the battery. Disconnest the battery cable from the back of the Starter motor, and the other red wire., then undo the two bolts holding the starter motor in place one on top and one below the starter motor., withdraw the starter motor from the motor and remove from the car, Installation is the reverse of the dissassembly instructions. Hope this helps
how do i remove the starter motor Mazda rx8
Under the bonnet, identify where the belt runs on one side of the motor. The alternator is located at the bottom on the rear side of the motor.(ie. the hard spot to get to) This is for a 774cc motor.
The back side of the motor below the intake and coolant bypass tube
how to remove starter motor on bmw 745
how to remove starter motor for Peugeot 206 1.4 hdi.
How do i remove an Audi A6 Starter motor
disconnect battery. from underneath disconnect solenoid wire and battery cable from starter solenoid. remove starter motor bolts. remove starter motor. installation is the reverse but be sure to place the starter shim between the starter motor and the engine or you will get noise during starts.
To replace the motor you start by removing the exhaust or you can undo the mount and lift out the motor. Consult owners manual for additional information.
# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner assembly # Disconnect the speedometer cable from the transaxle # Unscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoid # Remove the starter motor mounting bolts,supporting the starter motor as the bolts are removed and remove the starter motor
# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner assembly # Disconnect the speedometer cable from the transaxle # Unscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoid # Remove the starter motor mounting bolts,supporting the starter motor as the bolts are removed and remove the starter motor