answersLogoWhite

0


Best Answer

i don't have a 1995, but most horns work the same way. the horn itself is actually in the engine compartment. only the switch is connected to the steering wheel, and you shouldn't have to remove the wheel to work on that.

the horn "switch" is basically a metal-to-metal contact switch separated by a spring. one side is a fixed ring which is bolted under the steering wheel nut, the other side would be attached to the steering wheel cover. when you press on the steering wheel ctr you compress the spring so that the two pieces make contact, effectively closing the circuit. (again yours may or may not be the same)

its unlikely that the switch mechanism is faulty, i would start at the horn itself. if you don't know what an automobile horn looks like you may have trouble locating it. if that is the case i would suggest you go to the auto parts store and ask to look at one so you at least have an idea what you are looking for. (heck, while you're there they might even locate it for you.) in any case its probably located somewhere directly behind the grill area in front of the radiator.

hope that helps.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the steering wheel in 1995 Chevy truck to fix horn.?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove steering wheel Chevy lumina 2000?

How to remove steering wheel on Chevy lumina 2000


How do you remove the steering wheel on a 2001 Chevy Tahoe?

How to remove steering wheel on a 2001 chevy tohoe


How do you remove the cover to a 2001 Chevy Blazer Steering wheel column?

How to Remove the Steering wheel From a Chevy Blazer 2001


How do you remove the steering wheel from a 2000 Chevy Astro van?

How do you remove the steering wheel on a 1998 Chevy astro van


How do you remove the steering wheel on a 85 Chevy Celebrity?

To remove the steering wheel from your 1985 Chevy Celebrity: First remove the horn button. There should be a keeper at the tip of the steering shaft, remove it. Remove the nut that holds the wheel in place. Use a steering wheel puller to actually remove the steering wheel.


How remove steering wheel ford ranger?

You can remove the steering will, on your Ford Ranger pickup truck, by removing the steering wheel pin. Remove the wiring harness and the steering wheel will come off.


How do you remove steering wheel on a 2004 Chevy?

It can be hard to remove a steering wheel by hand on any vehicle. To remove it, there is a tool, steering wheel puller, that can be bought or rented from local auto shops. It will help remove the steering wheel.


How do you remove the steering wheel on a 1993 Chevy Sliverado?

take off center cover, remove large nut then use wheel puller to remove steering wheel


How do you remove the steering wheel in a 1988 Chevy Celebrity?

To remove the steering wheel in a 1988 Chevy Celebrity standard version: !. Remove the screws that hold the horn pad in place then remove it. Unplug the wire at the connector. 2, If it still has the safety clip remove it. 3, Use the appropriate wrench to remove the nut from the steering shaft. 4. Use a steering wheel puller to loosen then remove the steering wheel. Reverse the instructions to replace the steering wheel. Steering wheel retainer nut should be 30 ft. lbs. torque.


How do you remove ignition key lock cylinder from 1993 Chevy Truck if you have the key?

i have removed the steering wheel on a 1994 Chevy truck with a 5.7 TBI 1500 series 4x4, it is requesting another pulley once the steering wheel has been removed and i need to find one of those. but i am not sure what they are called and if there are different sizes.


How do you remove a steering wheel on a Nissan truck?

remove s.w.cover ,remove bolt,use s. w.remover


Where is the flasher on a 1994 Chevy truck?

right behind the sterring wheel on the steering column