Want this question answered?
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
The oxygen sensor on the 1999 Oldsmobile Cutlass Sierra is located on the lower exhaust. If you need to replace it, they are available for about $20 online.
DEX-COOL
None
Replacing a thermostat on a 1999 Oldsmobile Cutlass is very easy to do. First you will find the thermostat by following the upper radiator hose. It is under the exhaust crossover. The thermostat has two 13 mm bolts holding it in place. Take the bolts off to remove the thermostat and replace with a new one.
The 1999 Oldsmobile Cutlass OBD 2 port is under driver side dash left of steering column
dextron / mercon type 2
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.
take the complete headlight assembly loose or out to get to the bulb.
You fill the radiator through the overflow tank.
A Sledgehammer
To remove the stereo off of a 1999 Honda Civic loosen all of the mounting screws for the center console. Pull out the console is loosen the stereo mounting screws. With everything off pull the stereo and unplug the radio.