According to my brother (who is a mechanic), The stock stereo in the protege requires radio removal tools (2 sets) to remove -- you can get them at just about any parts store. Just carefully remove the molding around the radio, insert the tools all the way and then pull them outward to release the clips. The radio should just slide out.
To remove a stock stereo, you will first need to remove the bezel from the stereo. Then, pull the stereo out of the dashboard and remove the wiring harness.
Remove the retaining cover from your 2003 Suzuki stock stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable from the back of the stereo.
The stock stereo, from a 2003 Nissan Altima, can be removed by first removing the stereo front cover. Next, remove the four screws. Pull the stereo out and remove the wiring.
195/50/16 is the stock size
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
I do not believe it is. I know the stock stereo from the 2006 Mazda 3 does not support mp3 cds.
base model and DX have 103 HP. LX model has 125
Remove the plastic trim panels to the left and right of the stereo with your fingernails or something that will not scratch the plastic. This will reveal four holes on each side. At a Radioshack type store you can buy DIN removal tools. But for a Double Din stereo you will need to buy two such packages. The instructions come with the package.
There are clips on both sides of the stereo that you need to depress to pull the stereo out. You can access these without taking off the dash cover. On the driver's side you can reach up under the plastic moulding and feel the side of the stero. The clip is at the front. On the passenger side I removed the glove compartment (about 8 screws) to get at the clips. In my Miata's owners manual it showed me step by step on how to get mine out. YOu may want to try there, if you haven't already. :)
send this question next week I will be replacing the stock stereo this weekend if weather permits
Remove Stock Ford RadioCheck related link below
i currently have the same prob...to my understanging the stock stereo runs along with the dash lighting, so did you remove the stock stereo? also check fuses on the driver kick panel
You have to unscrew the center console and work your way up.
This site is the answer. You can get speaker size for any vehicule. http://www.crutchfield.com/S-qqpsEUoQelB/app/car/mycar.aspx#a299550
well it depends on your year, and if it is an lx dx, or es. The lx and dx for 1995-1998 protege's are 13" stock. The es i believe is 14". If you are looking to put new rims on the protege, the biggest ive seen go on a protege was about 17" but that might even be close to rubbing.
AnswerIt's located under the factory stereo in Premium sound models. Here's a link to show you where and how to remove it!Good Luck!-Shaun-
No remote wire on stock deck tap into igniton wire (yellow with black stripe) for 1999 ford rangers & Mazda B-series.
The wattage of your stock stereo in your 1989 Acura Integra is 75 watts. There was anÊoption for a larger stereo output of up to 200 watts.
You must remove the front of the dash. Everything around the stereo. Very time consuming. Just remember where the parts and all the screws go when you go to put it back together. It is not that difficult. Good Luck.
If you mean the stock stereo, you have to get these U shaped tools that have nubs on the ends of them. When you insert them, the stereo should pop out enough to pull it the rest of the way out. You could probably get a dealer or stereo place to do it for free if you ask nicely. Also if you order a new stereo they may or may not include the U tools.
stock speaker size for the mazda b3000 04 is 6x8
it depends if u are using the stock stereo then no but if it is not a stock stereo then u may have an aux input jack which comes out the back of the stereo the easiest way is to just pull out the stereo and take a look
you must remove the dash panel that goes over the stereo, heater and around the gauges then all you have to do is pull it out just by pressing two tabs on each side of the stereo