Want this question answered?
To remove the valve cover on a 92-97 Toyota paseo. Remove the spark plug igniters from valve cover. Remove crankcase ventilation valve(black plastic 90 degree elbow) from valve cover and intake manifold. remove the fiev nuts on th top o the valve cover. place a pry bar between cylinder head and valve cover at the corners where they have left a gap. Pry slowly and easily. be sure to work all corners not just one.
how do i remove the valve cover to change the gasket in a toyota camry 1996
Disconnect the spark plug wires, disconnect the PCV-valve, remove four nuts holding the cover. Make sure that wires are not in the way. Remove the cover.
remove the "dog bone" engine mount. then the 2 upper 10mm bolts on the timing belt cover. this will allow you to pull the harness out of the way to remove the cover.
how to replace valve cover gasket toyota rav4 2001
The pcv valve should be located on top of the valve cover. It plugs in, and should pull out with some gentle coaxing.
I believe it is located on the passenger side valve cover. You will have to remove the air surge tank to access it.
you have to remove the intake manafold and remove the valve the valve cover in question and the old seal should pry right out clean the contact surface on the engine, line up the new gasket on the cover and put it back on, then put it all back together
Yes.
what is the torque specifications for a toyota camry 4-cylinder valve cover
I dont know what other egr valve will work, but I know they can be cleaned out and put back on the car. I have a 96 Paseo, and I soaked mine in carb cleaner and was able to get all the carbon out and put it back on the car and works fine.
CAUTION: Some models are equipped with anti-theft-radio make sure you have the activation code before disconnecting battery * Disconnect negative battery cable * Detach the accelerator cable from the cable guides on the valve cover (It's not necessary to remove the cable guides unless you're replacing the valve cover) * Disconnect the PCV and breather hoses from the valve cover * Remove the spark plug wire cover bolts remove the cover and then remove the spark plug wires * Remove the bolts that attach the upper timing belt cover to the valve cover * Remove the valve cover bolts and then remove the valve cover