Want this question answered?
The vent valve is mounted on a bracket near the fuel tank. Disconnect the electrical connector. Remove the hose from the vent valve. release the retainers and remove the vent valve from the bracket. It is under the truck.
soleniod valve vent for 2007 silvrado located
The vent valve is mounted on a bracket near the fuel tank. Disconnect the electrical connector. Remove the hose from the vent valve then release the retainers and remove the vent valve from the bracket. Installation is the reverse of removal.
Above the spare tire.
install updated vent control solenoid valve and jumper harness.
The vent is held in by a rubber grommet. Lubricate the grommet and valve with some spray silicone. Wiggle the valve around to disperse the lubricant then pull the valve straight out as you wiggle it.
On the rear driver side fender. Remove the tire and the shield.
Evaporative Emission Control System Vent Control Circuit Malfunction, look for faulty vent valve or a short on the vent control circuit.
fuel vent valve is on the top of the gas tank
On the 2007 Chevy, it is by the gas tank towards the middle of the box of the truck.
Remove the throttlebody to get access to the 2 torq, screws.
also referred to as the Vapor Canister Purge Valve and is in\on the charcoal evaporator canister. its under the floor above the spare tire location, locate the charcoal canister on the front of the gas tank and trace the vent line to the vent valve.