There is a spring clip located behind the handle that must be removed then the handle will slide off. You can purchase a tool for the job from most parts stores for very little money.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
if you push your door panel back and look down in between the door panel and the window handle there will be a little clip that you have to remove. sometimes you can get it with a screwdriver but they make a special tool for it. most body repair shops or car audio shops will have them and sometimes you can get them to pop that clip out for you for a tip.
You need a special flat forked tool to remove window roller handle.
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
The window winder is secured by a spring wire clip. Push the circular pad away from the winder handle and pull out the clip with a crochette hook or similar.
can you show me the wiring diagram or schematics for a Chevy truck
yes
What are the dimensions of 05 Chevy truck
you sell the truck
You will need to remove the inside door panel, by prying outward on the door panel retaining clips. When the door panel is removed the door handle assembly will be visible. Remove the door handle retaining bolts.
break the window its easier