Want this question answered?
Remove the inside panel from your Hyundai rear door. The wiper motor mechanism will be visible. Remove the wiper motor linkage. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new rear wiper motor.
As of 2011, all Hyundai Accent model years come equipped with hook-end wiper arms (with the exception of the rear wiper on the 2007+ models which has a Roc Lock 2 arm attachment). See sources and related links below for wiper blade installation videos.
project on autobiles
The size of the replacement wiper blades for a 2005 Hyundai Accent is different for the driver side and passenger side. For the driver side, it is 20' inches and for the passenger it is 18 inches.
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
There could be a shortage in the wiring that goes to the fuse compartment that could be causing it to do that.
Mounted on the firewall directly behind the brake master cylinder reservoir. UNDER WINDSHIELD WIPER COWL COVER remove the wiper arms remove the windshield wiper cowl cover disconnect the eletrical connector from the wiper motor and remove the motor remove the wiper motor retsining bolts pry the linkage arm off the wiper motor pin with large screwdriver
# Remove the wiper arms and blade assemblies. # Remove the cowl panel. # Remove the pivot shaft mounting nuts and push the pivot shaft toward the inside. # Remove the wiper motor mounting bolts. # Disconnect the linkage from the motor and remove. To Install: # Lubricate the wiper linkage. # Connect the wiper linkage to the motor. # Install the wiper motor to the firewall. # Pull the pivot shaft into position and install the pivot shaft mounting nuts. Tighten to 7-11 ft. lbs. (10-15 Nm). # Install the cowl panel. # Install the wiper arm and blade assemblies. # Check wipers for proper operation.
On one side of the intake manifold, touching the cable tubing going to the right wiper motor.
The 2005 Hyundai Accent takes 20" drivers and 18" passenger side wiper blades. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
Remove negative cable from battery, remove connector from wiper motor, remove wiper arms, remove plastic cover below windscreen (try to find all screws before removing; it can be removed very easy but will break if you forget to remove any screw) Remove the center lug on the motor while fixing the drive mechanism to the wiper arms with large pliers; remove the mechism from the motor, open the 3 fixing bolt of the motor and remove it. Reasembly vice versa.