Want this question answered?
it is located in the throttle body. On the bottem. You need to remove the air filter hoses, remove the 4 bolts to the throttle body and then 2 screws to remove the tps.
On a 2001 Ford Explorer Sport : The throttle body is in the engine compartment . It is under the plastic cover that has 4.0 SOHC on it , at one end of the larger diameter rubber engine air intake tube
The throttle plate is inside the throttle body on the intake manifold. The throttle cable from the accelerator peddle is connected to the throttle plate shaft on the throttle body. If you remove the air cleaner hose at the throttle body, you will see the disc shaped plate.
It is located on the bottom of the throttle body. You can find the throttle body by following the two big air pipes from the air filter box, they end at the throttle body. To access the throttle position censor you must remove the throttle body.
On the E150 (1996 is my model year), the TPS is mounted on the bottom of the throttle body. Usually you need to remove the throttle body to access the TPS.
It's on the throttle body of the Ford Aspire.
the Intake Air Temperature (IAT) sensor is located in the air cleaner to throttle body supply tube ( big rubber tube ) close to the engine throttle body.
no
on the throttle body
clean the throttle body on 20000 Ford Ranger 3.0 v6 is with throttle body cleaner purchased at an auto parts store.
Under the plastic engine cover at the end of the big rubber engine air intake tube
On a 94 Ford 7.3, the throttle POS sensor is on the throttle body. It is on the opposite side of the throttle linkage.