0
Drain the engine oil and replace with new oil.
Water mixing with the engine oil happens mostly because of a blown head gasket. It produces a slurry mix in the combustion chamber which can create severe engine damage.
You will have to drain every bit of the slurry and ensure the engine is clear of that matter.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where is the themostat on 1994 previa?
get under the car, follows the water hose to the engine remove the water hose and remove the base where the hose hooks in to and you will find the termostat inside the base.
Can you wash your car engine with water?
Yes, you can wash your car engine with water.
How do you get rid of the dirt in the engine coolant jug of a car?
Remove the jug and wash it out with soap, water and a bottle brush.
How do you remove the engine from a 1999 Taurus?
you can remove the engine from the top by leaving transmission still in car
How do you remove a car engine from 1966 Chevy Nova?
how to remove a 1966 283 engine from a Nova
1992 Lincoln Town Car - Engine Removal?
I want remove engine out from car and transmission
How do you remove the engine?
how do you remove the engine? Is it pulled from the top or do you unbolt the sub frame and slide it out from under the car?
How do you replace the water pump on a 1990 Dodge Daytona?
Suport engine with a jack under oil pan..remove top right motor mount..remove two bolts that hold POWER STEERING PUMP to the engine bracket..remove bolt that holds BELT TENSIONER to engine bracket..3 or 4 more bolts that hold ENGINE BRACKET to ENGINE..remove ENGINE BRACKET from ENGINE..remove TIMING COVERS..Loosen TIMING BELT TENSIONER...Release SPRING...(Water pump is driven by the timing belt) Remove Timing belt..Remove Water Pump...replace...RE-TIME!..Put back together..be sure to RE-TIME, if you want the car to run again, anyway.. Not an easy job..I hate working on this car.
How do you removed the crankshaft on 1996 Isuzu trooper?
You have to remove the engine first from the car. Place it on an engine stand and work your way on removing the cranksaft. No way to remove it while the engine is in the car.
How do you replace the water pump on a 1991 Toyota Camry 2000?
on the 3S-FE engine, you will have to remove the engine from the car, then pull the cover off where the timing belt is. The water pump is inside there. It's a JOB.
How do you stop a leak in the water pump on a 92 crown vic without replacing the water pump?
Remove all coolant from engine and do not drive car anymore!
How do replace the water pump on a 2001 ford focus zx3?
Good luck, na drop the engine and pull it from under the car, or raise the engine and remove from top. remove water tank, take off pulley (Re-Use) always put on a new belt.
