the water pump is located on the left side of the engine mid way down. remove the belt and then the pully. the pump is located behind of the pully. there is not much room and it is not easy to replace,
how to remove a water pump on a 95 infiniti g20
Remove the belt from your 1992 Chevy Lumina water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install your water pump.
remove timing chain
need help changin water pump on a 1996 infiniti i30
The water pump is driven by the pulley and serpentine belt on the left side of the engine. You'll need to remove the water pump pulley to access the water pump housing bolts. You may need to remove other pulleys to access the bolts. Replace the water pump gasket to prevent leaks.
Begin by removing the wiring harness from your auxiliary water pump. Drain the water from the system. Remove the water supply hose. Remove the water pump retaining bolts. Reverse the process to install your new auxiliary water pump.
Drain the radiator. Remove the pump belt. Remove the fan and shroud if needed. Unbolt the pump and remove it . Bolt on the new pump. Reinstall the fan and shroud, the belt, then refill the radiator.
how to replace a water pump for a infiniti g20
Drain the water from the cooling system. Remove the water hose from the water pump. Remove the belt from the water pump. Remove the water pump retaining bolts.
how do you install a water pump on a 1992 toyota camry
Drain the water from the cooling system. Remove the water hose from the water pump. Remove the water pump retaining bolts. Remove the water pump. Reverse the process to install the new water pump.
Depending on engine it is pretty simple... I have a 2.5L 4Cylinder 1992 Dodge Spirit... First u drain the coolant. Remove Serpintine belt Remove the A/C Compressor and keep it out of the way with someone such as rope or a bungee cord, whatever you might have to keep it up and out of the way... Remove Alternator. Remove the main mounting bracket that holds the AC Compresser and the Alternator. Remove the 3 bolts holding the water pump housing to the engine block. Now all you have to do is remove the water pump from the water pump housing then do this in reverse. Installing the new gaskets and such.