0
How do you remove water pump on 1997 Buick LeSabre due to the bolt behind the power steering pulley?
Wiki User
∙ 12y ago
The Power Steering pump is held by two bolts. Use a socket and remove the top bolt and loosen the bottom bolt. Be careful not to completely remove the bottom bolt. The PS pump will loosen up enough so that you can push it towards the firewall and you will JUST have enough room to remove the water pump bolts. Its tight but it will squeeze out.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you remove power steering pump pulley on 1999 lesabre?
Pulley is pressed onto pump, you need a puller to remove.
How do you remove a power steering pulley on a 1997 Nissan Altima?
how to remove a power steering pulley on a 1997 Nissan altima
How do you remove power steer in pump on factory no air Chevy?
You have to remove the pulley first and you need a power steering pulley puller to do it. You can get one from Napa for usually about $40. There are bolts behind the pulley that hold the pump to the mounting bracket.
How do you remove the pulley on the steering pum p on a 2001 sierra?
You need to rent, borrow or purchase a power steering pulley puller. This tool will remove and replace the pulley without damage to the pulley or the pump.
How do you remove the power steering pulley on a 355 Chevy?
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
How do you remove pulley from power steering pump 95 Chevy silverado?
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
How do you get the water pump bolt that is behind the pulley for the power steering pump loose when all other bolts are out and you pulled a muscle trying to get the pulley off?
You need to remove the entire power steering pump. There are two bolts holding it on at the 12 and 6 o'clock position. Remove these via the holes in the power steering pump pulley. (no need to remove the pulley) Push the pump to the side and you then have access to the water pump bolt. Hope this helps. "G"
How do you remove the steering pump pulley on a Nissan 200sx?
Take off the sockets and remove the pump pulley.
How do you remove power steering pulley 2005 impala?
To remove that pulley with out damaging the pump or the pulley you need a power steering pulley puller. This tool will also install the pulley. Your local auto parts store can rent or sell you that puller.
Do you turn the power steering pulley remover clockwise to remove the pulley?
Yes you do.
Do you have to remove the power steering pulley in order to remove the bracket on a 93 Chevrolet pickup with a 350 Does the pulley have a bolt in the center?
power steering pulley is pressed on. to remove pulley, u need to completely remove pump from vehicle and take it to a mechanic that has right tools for removing
How do you remove powersteering pully on a 1994 s-10 zr2 pickup with 4.3 vortec?
You will need a power steering pulley puller. It is designed to remove and install the power steering pulley. If you attempt to remove the pulley without it you will probably damage the pulley or the pump or both.
