Want this question answered?
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
To remove the wiper arms from a 1996 Concord, remove the small clip holding them on. Then pull up on the arm.
To replace the wiper control switch in the 1996 Honda Civic, you must remove the steering wheel. With the wheel out of the way , remove the column covers and disconnect the electrical harness from the wiper switch. Remove respective screws and slide replacement switch into place. Replace respective screws, column cover and steering wheel.
Remove the wiper fluid container, it's under there.
The 1996 Mitsubishi Mirage wiper blade sizes are 20" drivers and 19" passenger side wiper blades. Do not buy by length-only however. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
Wilson the alternator belt. With the tensioner pulley. Remove the wiring harness from the alternator. Remove the four alternator retaining bolts.
Mighty Ducks - 1996 was released on: USA: 7 September 1996
On a 3.3 or 3.8 you may have to remove the wiper cowling to access.
The 1992, 1993, 1994, 1995, 1996 & 1997 Mitsubishi Montero LS takes a 14" replacement rear wiper blade. Note however, when buying wipers be sure to always lookup your vehicle make, model and year in the application guide book at the store
where is the oxygem sensor on 1996 Mitsubishi mirage
Mighty Ducks - 1996 Buzz Blitzman Mighty Duck 1-18 was released on: USA: 22 November 1996
the sucker is welded on, you gotta remove the bumper and tail lights, and start drilling away at the welds