1. remove w/s wiper arms 2. pull top cover from the wiper motor house, be sure to disconnect the w/s washer hoses. 3. remove the 5 or 6, 8mm head bolts holding assembly to fire wall 4. remove the sensor that is attached to assmembly on passenger side (2ea 8mm nuts) 5. lift assembly and diconnect wires from motor and remove assembly. 6. remove 3ea 10mm head bolts that hold motor to assembly. 7. install new motor and reverse operation.
It is under the plastic cover right below windshield. YOu have to remove retaining clips.
The wiper control module is located inside the wiper motor assembly.
It is on top of the wiper motor itself. it's intergral.
Remove the wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiper fluid container, it's under there.
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
Remove the wiper arm from the wiper motor. Remove the wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the rear wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the 2005 Honda Odyssey rear wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.