There should be 4 bolts on bottom of the engine, make sure they are still there and tighten them, they can loosen up or even fall off.
Sounds like the engine is going to need a complete rebuild.
Loss of compression is caused by bad internal engine wear or internal engine failure. Both mean the engine will need serious repair
If you want to loose some fingers in the process just try that repair with the engine running. Otherwise the answer is a big NO.
replace it
You have to find the cracked hose, loose component, etc and repair/replace it.You have to find the cracked hose, loose component, etc and repair/replace it.
Probably there is something loose. If you frequently go at that speed, I would suggest you consult with a repair shop.Probably there is something loose. If you frequently go at that speed, I would suggest you consult with a repair shop.Probably there is something loose. If you frequently go at that speed, I would suggest you consult with a repair shop.Probably there is something loose. If you frequently go at that speed, I would suggest you consult with a repair shop.
it is not a cracked engine block it is just a loose block
When riding a bicycle, proper clothing is a must. No loose fitting clothing should be used, it might get caught in the chain system. Loose fiiting shoes are a definite no no.
A loose engine mount would not normally cause the engine to fall out because each car has several motor mounts. A loose mount could cause the motor to be off of balance.
Send it to a Browning authorized repair center.
The amount of pounds lost will vary according to your current weight and level of fitness at the time of riding along with how long you ride and what type of riding you are doing.
It means that there is a problem with the emissions system. It takes a professional to diagnose and repair the problem. But do check you gas cap to see if it is loose as that will trigger the light.