Are you talking about a crack in the engine block? Sorry, it's not repairable.
This is not easy. You're talking about a small crack in the engine block, I assume. Ideally you should stop the crack from getting longer by drilling a small hole at the exact end of it. Then the crack needs to be welded, probably after the engine has come out (depending on accessibility). But this is a hell of a big job for a small hairline crack. You may find that cleaning the area throughly and using one of the epoxy pastes around (JB Weld is a very good one) that you can achieve a good repair cheaply and easily. But drill the small hole first.
If the crack has not yet come large and cracked outwards, you can contact your insurance company to fix it. In many companies, they have small tape-like repair kits that will remedy the crack, or specialized companies that will fill in the crack free of charge!
Small Engine Repair - 2006 is rated/received certificates of: Ireland:15A
You can get a small chip or crack repaired by an auto glass specialist such as Safelite. A repair is a much better alternative to waiting it out until the small crack becomes larger and you are forced to replace the entire windshield.
Most small engine repair businesses will be able to do a simple repair such as a broken wheel. For example, A K Small Engine Works in Versailles can repair a broken lawnmower wheel.
If the engine knocks when it is cold, it might be a crack in the exhaust manifold, or possibly a crack in on of the exhaust manifold bolts leading to the block. The crack is small, and once warm will swell shut, thereby stopping the noise. Without repair, it might lead to valve exhaust valve damage.
You can receive small engine repair training a local trade school or at a special technical training institute. You can get a simple associate's degree for that.
The repair shop could fix the screen by putting a new one on it for a low price.
One of the major trends in the small repair business is that people with old vehicles tend to take their vehicles to the garage more often. The small engine repairs is the core business of this business.
Any small engine/lawnmower repair shop in your area.
The transition to a small engine repair school from a large repair school is not that easy, because it takes a good deal of adjusting to the size difference.
Daniel London has written: 'Small engine care & repair' -- subject(s): Maintenance and repair, Small gasoline engines
There is a do-it-yourself glass repair kit available at Glass Star America that uses a small vacuum tube to repair cracks in glass. Glass repair kits don't always work and if they're in your field of vision you want to be very careful about how you repair it. Your best bet is to take it to a repair shop.
If the crack is small I would suggest buying a patch kit from a local pool store. The patch kits are easy to apply after the pool is drained. If the crack is large you'll need to hire a professional. You can call someone and they will fix your fiberglass pool. You can also try to buy a repair kit depending on how big the crack is. If it is a big crack, your should let a professional do the job.
I do know of a solution to this problem. If the crack is just a small one there is a tablet you can get at any Automotive Repair store. It's called Radiator Repair its a small "tablet" you drop in your radiator and let the car run, as it warms up you will notice the crack disappear. Other than that JB Weld is a good bet if you know where the leak is generating from.
The Thermostat Housing is located on the right hand side of the engine. Remember this is FWD configuration so think of it as being mounted on the "rear" of the engine in terms of normal V6, V8, L6, etc. Trace the radiator hose (right side of radiatoras you are looking from the front of the engine) and you will find it leads to the "water outlet" on the thermostat housing. There are a total of 4 hoses attached to the Thermostat Housing. It is a black plastic (OEM) housing held onto the engine by 3 bolts. Note: ther are 3 Torx screws visible, they for the water outlet housing and can be worked on while the Thermostat Housing is off of the engine. Plastic can easily crack/score so be gentle whe removing the hoses and hardware. This housing is notorious for leaking even when a new gasket (O-Ring) is installed. I suggest dressing the housing mount surface with a small bead of grey RTV along with a new gasket prior to installing. Be sure to use only a small bead in an effort not to get excess into the housing or to foul the gasket.
Small Engine Repair had a number of producers on the production team. They were: Tristan Orphen-Lynch; Aoife O'Sullivan; Jo Homewood; Gary Phillips; Mark Vennis and Dominic Wright.
go to pennfoster.edu/smallengine it is a site that gives you information about school for repair engine. you can take that class in your home for your private lesson.
it depends which repair shop you go to but to repair a cracked screen of a lg ks360 its normally 49.99 if its a small crack its 39.99
Genrally repairs are just for holes like when a rock first hits. sometimes small cracks can be fixed. You will probably have to replace it. If the crack in your windshield is small enough you may be able to fix it yourself. There are windshield repair kits that inject a resin material into the crack, if it's too large for that it can be repaired by a professional without having to replace the entire windshield.
scrap metal yard, small engine repair or similar
auto body repair shop plastic in tube made for fixing cut or ripped plastic bumpers worked on ours for 3 years so far
There are some Engine Repair Schools in the U.S. The city that have more schools is Florida and there is a page where you can find a lot of information about it called Citytowninfo.com
Fleas of any variety will live in any small crack they can fit into -- hardwood floors, for instance, gaps under moldings, and small gaps in any appliance housing. So if there is a small crack in the housing, such as, perhaps, where the two halves of a plastic case fit together, then yes, there could be a few fleas in there. They are generally happier in carpets, though, the carpet fibers hide them very well.
If it is just a small nick or crack, it should only take about 10 minutes. If it is a serious crack, it could take days or even weeks if they need to special order your windshield.