Want this question answered?
You must replace the assembly/ or the entire door unit
I have replaced door handle on my 1993, you have to remove the interior door pannel. If it is broke off from door handle look at junk yards for a new handle, if you need the clips that hold it on check with a local gm dealer they sometimes have them or you can order them.
how do i repair theback door handle
You will need to remove the inside door panel of your 1993 Chevrolet Blazer. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
2005 ford escape door handle inside and outside the suv will not open the door
Replace the outside door hanle,but first pull the interior door panel to see if the out side door handle linkage is busted.
Take it to a dealer
Per Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups: On 1998 and later models, the interior door handle is secured by a single rivet that must be drilled out for handle removal. A rivet gun is necesssary to replace the drilled out rivet and to secure the handle in its original position. It is necessary to remove the door trim panel and watersheild for access.
The handle has to be replaced. there is a little plastic peice that fails on the handle thus not allowing you to open he door with the outer handle. This is not repairable. 1. Remove inner door cover. 2. Disconnect all cables. 3. Unscrew handle from inside. 4. Remove damaged handle and replace with new one. 5. Tighten down retaining screws. Check Handle for proper orientation. 6. Reconnect all cables. Check Handle for proper operation. 7. Refit inner door cover. the door is restored to proper operation.
Remove door panel for access and investigation
I don't know - but the question about the 1993 door handle is the same...
from the inside. take your door panel off and look around in there. the door handle is usually held on with pop rivets that have to be cut off from the inside of the door.