how do i repair theback door handle
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
You can't remove just the inside handle. The handle is part of the door panel.
Remove the long access panel from the inside of the tailgate.Unhook the two metal rods from the handle on the inside of the tailgate.Remove the two bolts from the door handle located on the inside of the tailgate.
The rear door handle, on a 2012 Volkswagen Passat, can be removed by first removing the decorative cover. Remove the retaining screws and the linkage.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
To remove the door panel, there are two screws you need to remove which are located under the door handle(the one you use to pull the door to close it) ,the you need to remove the mirror adjusting knob by pulling it out, then remove the window handle ( there is plastic ring around the handle which comes between the handle and the door, you need to pull it up using a screwdriver then simply pull the handle out), then just pull the door handle out with a screwdriver from the edges or preferably with your hands.
Remove the door panel
Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.
You will need to remove the inside door panel of your Mustang. Remove the linkage from the outside door handle. Remove the outside door handle retaining bolts. Reverse the process to install the new outside door handle.
First remove the door panelRemove the moisture barrier.Disconnect the rods from the handle inside the door.Next remove the two bolts holding the handle on.